You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

140 lines
4.3 KiB

# NOTE: these are needed by the configure.in inside the packages folder
N2N_VERSION_SHORT=@N2N_VERSION_SHORT@
GIT_COMMITS=@GIT_COMMITS@
########
CC?=gcc
DEBUG?=-g3
#OPTIMIZATION?=-O2
WARN?=-Wall -Wshadow -Wpointer-arith -Wmissing-declarations -Wnested-externs
#Ultrasparc64 users experiencing SIGBUS should try the following gcc options
#(thanks to Robert Gibbon)
PLATOPTS_SPARC64=-mcpu=ultrasparc -pipe -fomit-frame-pointer -ffast-math -finline-functions -fweb -frename-registers -mapp-regs
N2N_OBJS_OPT=
LIBS_EDGE_OPT=@N2N_LIBS@
OPENSSL_CFLAGS=$(shell pkg-config openssl; echo $$?)
ifeq ($(OPENSSL_CFLAGS), 0)
CFLAGS+=$(shell pkg-config --cflags-only-I openssl)
endif
CFLAGS+=$(DEBUG) $(OPTIMIZATION) $(WARN) $(OPTIONS) $(PLATOPTS)
INSTALL=install
MKDIR=mkdir -p
OS := $(shell uname -s)
INSTALL_PROG=$(INSTALL) -m755
INSTALL_DOC=$(INSTALL) -m644
# DESTDIR set in debian make system
PREFIX?=$(DESTDIR)/usr
#BINDIR=$(PREFIX)/bin
ifeq ($(OS),Darwin)
SBINDIR=$(PREFIX)/local/sbin
else
SBINDIR=$(PREFIX)/sbin
endif
MANDIR?=$(PREFIX)/share/man
MAN1DIR=$(MANDIR)/man1
MAN7DIR=$(MANDIR)/man7
MAN8DIR=$(MANDIR)/man8
N2N_LIB=libn2n.a
N2N_OBJS=n2n.o wire.o minilzo.o twofish.o \
edge_utils.o \
transform_null.o transform_tf.o transform_aes.o \
tuntap_freebsd.o tuntap_netbsd.o tuntap_linux.o \
tuntap_osx.o
LIBS_EDGE+=$(LIBS_EDGE_OPT)
LIBS_SN=
#For OpenSolaris (Solaris too?)
ifeq ($(shell uname), SunOS)
LIBS_EDGE+=-lsocket -lnsl
LIBS_SN+=-lsocket -lnsl
endif
APPS=edge
APPS+=supernode
APPS+=example_edge_embed
DOCS=edge.8.gz supernode.1.gz n2n.7.gz
all: $(APPS) $(DOCS) benchmark
edge: edge.c $(N2N_LIB) n2n_wire.h n2n.h Makefile
$(CC) $(CFLAGS) edge.c $(N2N_LIB) $(LIBS_EDGE) -o edge
supernode: sn.c $(N2N_LIB) n2n.h Makefile
$(CC) $(CFLAGS) sn.c $(N2N_LIB) $(LIBS_SN) -o supernode
benchmark: benchmark.c $(N2N_LIB) n2n_wire.h n2n.h Makefile
$(CC) $(CFLAGS) benchmark.c $(N2N_LIB) $(LIBS_EDGE) -o benchmark
example_edge_embed: example_edge_embed.c $(N2N_LIB) n2n.h
$(CC) $(CFLAGS) example_edge_embed.c $(N2N_LIB) $(LIBS_EDGE) -o example_edge_embed
.c.o: n2n.h n2n_transforms.h n2n_wire.h twofish.h Makefile
$(CC) $(CFLAGS) -c $<
%.gz : %
gzip -c $< > $@
$(N2N_LIB): $(N2N_OBJS)
ar rcs $(N2N_LIB) $(N2N_OBJS)
# $(RANLIB) $@
clean:
rm -rf $(N2N_OBJS) $(N2N_LIB) $(APPS) $(DOCS) test *.dSYM *~
install: edge supernode edge.8.gz supernode.1.gz n2n.7.gz
echo "MANDIR=$(MANDIR)"
$(MKDIR) $(SBINDIR) $(MAN1DIR) $(MAN7DIR) $(MAN8DIR)
$(INSTALL_PROG) supernode $(SBINDIR)/
$(INSTALL_PROG) edge $(SBINDIR)/
$(INSTALL_DOC) edge.8.gz $(MAN8DIR)/
$(INSTALL_DOC) supernode.1.gz $(MAN1DIR)/
$(INSTALL_DOC) n2n.7.gz $(MAN7DIR)/
# Docker builder section
DOCKER_IMAGE_NAME=ntop/supernode
DOCKER_IMAGE_VERSION=$N2N_VERSION_SHORT
N2N_COMMIT_HASH=@GIT_REVISION@
default: steps
steps:
if [ "$(TARGET_ARCHITECTURE)" = "arm32v7" ] || [ "$(TARGET_ARCHITECTURE)" = "" ]; then DOCKER_IMAGE_FILENAME="Dockerfile.arm32v7" DOCKER_IMAGE_TAGNAME=$(DOCKER_IMAGE_NAME):$(DOCKER_IMAGE_VERSION)-arm32v7 make build; fi
if [ "$(TARGET_ARCHITECTURE)" = "x86_64" ] || [ "$(TARGET_ARCHITECTURE)" = "" ]; then DOCKER_IMAGE_FILENAME="Dockerfile.x86_64" DOCKER_IMAGE_TAGNAME=$(DOCKER_IMAGE_NAME):$(DOCKER_IMAGE_VERSION)-x86_64 make build; fi
build:
$(eval OS := $(shell uname -s))
$(eval ARCHITECTURE := $(shell export DOCKER_IMAGE_TAGNAME="$(DOCKER_IMAGE_TAGNAME)"; echo $$DOCKER_IMAGE_TAGNAME | grep -oe -.*))
docker build --target builder --build-arg COMMIT_HASH=$(N2N_COMMIT_HASH) -t $(DOCKER_IMAGE_TAGNAME) -f image-platforms/$(DOCKER_IMAGE_FILENAME) .
docker container create --name builder $(DOCKER_IMAGE_TAGNAME)
if [ ! -d "./build" ]; then mkdir ./build; fi
docker container cp builder:/usr/src/n2n/supernode ./build/supernode-$(OS)$(ARCHITECTURE)
docker container cp builder:/usr/src/n2n/edge ./build/edge-$(OS)$(ARCHITECTURE)
docker container rm -f builder
docker build --build-arg COMMIT_HASH=$(N2N_COMMIT_HASH) -t $(DOCKER_IMAGE_TAGNAME) -f image-platforms/$(DOCKER_IMAGE_FILENAME) .
docker tag $(DOCKER_IMAGE_TAGNAME) $(DOCKER_IMAGE_NAME):latest$(ARCHITECTURE)
push:
if [ ! "$(TARGET_ARCHITECTURE)" = "" ]; then \
docker push $(DOCKER_IMAGE_NAME):$(DOCKER_IMAGE_VERSION)-$(TARGET_ARCHITECTURE); \
docker push $(DOCKER_IMAGE_NAME):latest-$(TARGET_ARCHITECTURE); \
else \
echo "Please pass TARGET_ARCHITECTURE, see README.md."; \
fi
.PHONY: steps build push
# End Docker builder section