n2n/doc/ManagementAPI.md

Management API

This document is focused on the machine readable API interfaces.

Both the edge and the supernode provide a management interface UDP port. These interfaces have some documentation on their non machine readable commands in the respective daemon man pages.

Default Ports:

• UDP/5644 - edge
• UDP/5645 - supernode

A Quick start example query: echo r 1 help | nc -w1 -u 127.0.0.1 5644

JSON Query interface

A machine readable API is available for both the edge and supernode. It takes a simple text request and replies with JSON formatted data.

The request is in simple text so that the daemon does not need to include any complex parser.

The replies are all in JSON so that the data is fully machine readable and the schema can be updated as needed - the burden is entirely on the client to handle different replies with different fields. It is expected that any client software will be written in higher level programming languages where this flexibility is easy to provide.

Since the API is over UDP, the replies are structured so that each part of the reply is clearly tagged as belonging to one request and there is a clear begin and end marker for the reply. This is expected to support the future possibilities of pipelined and overlapping transactions as well as pub/sub asynchronous event channels.

The replies will also handle some small amount of re-ordering of the packets, but that is not an specific goal of the protocol.

Note that this API will reply with a relatively large number of UDP packets and that it is not intended for high frequency or high volume data transfer. It was written to use a low amount of memory and to support incremental generation of the reply data.

With a small amount of effort, the API is intended to be human readable, but this is intended for debugging.

Request API

The request is a single UDP packet containing one line of text with at least three space separated fields. Any text after the third field is available for the API method to use for additional parameters

Fields:

• Message Type
• Options
• Method
• Optional Additional Parameters

The maximum length of the entire line of text is 80 octets.

Message Type

This is a single octet that is either "r" for a read (or query) method call or "w" for a write (or change) method call.

To simplify the interface, the reply from both read and write calls to the same method is expected to contain the same data. In the case of a write call, the reply will contain the new state after making the requested change.

Options

The options field is a colon separated set of options for this request. Only the first subfield (the "tag") is mandatory. The second subfield is a set of flags that describe which optional subfields are present. If there are no additional subfields then the flags can be omitted.

SubFields:

• Message Tag
• Optional Message Flags (defaults to 0)
• Optional Authentication Key

Message Tag

Each request provides a tag value. Any non error reply associated with this request will include this tag value, allowing all related messages to be collected within the client.

Where possible, the error replies will also include this tag, however some errors occur before the tag is parsed.

The tag is not interpreted by the daemon, it is simply echoed back in all the replies. It is expected to be a short string that the client chooses to be unique amongst all recent or still outstanding requests.

One possible client implementation is a number between 0 and 999, incremented for each request and wrapping around to zero when it is greater than 999.

Message Flags

This subfield is a set of bit flags that are hex-encoded and describe any remaining optional subfields.

Currently, only one flag is defined. The presence of that flag indicates that an authentication key subfield is also present.

Values:

• 0 - No additional subfields are present
• 1 - One additional field, containing the authentication key

Authentication Key

A simple string password that is provided by the client to authenticate this request. See the Authentication section below for more discussion.

Example Options value

e.g: 102:1:PassWord

Example Request string

e.g: r 103:1:PassWord peer

Reply API

Each UDP packet in the reply is a complete and valid JSON dictionary containing a fragment of information related to the entire reply.

Common metadata

There are two keys in each dictionary containing metadata. First is the _tag, containing the Message Tag from the original request. Second is the _type whic identifies the expected contents of this packet.

_type: error

If an error condition occurs, a packet with a error key describing the error will be sent. This usually also indicates that there will be no more substantial data arriving related to this request.

e.g: {"_tag":"107","_type":"error","error":"badauth"}

_type: begin

Before the start of any substantial data packets, a begin packet is sent. For consistency checking, the method in the request is echoed back in the error key.

e.g: {"_tag":"108","_type":"begin","cmd":"peer"}

For simplicity in decoding, if a begin packet is sent, all attempts are made to ensure that a final end packet is also sent.

_type: end

After the last substantial data packet, a final end packet is sent to signal to the client that this reply is finished.

e.g: {"_tag":"108","_type":"end"}

_type: row

The substantial bulk of the data in the reply is contained within one or more row packets. The non metadata contents of each row packet is defined entirely by the method called and may change from version to version.

Each row packet contains exactly one complete JSON object. The row replies may be processed incrementally as each row arrives and no batching of multiple packets will be required.

e.g: {"_tag":"108","_type":"row","mode":"p2p","ip4addr":"10.135.98.84","macaddr":"86:56:21:E4:AA:39","sockaddr":"192.168.7.191:41701","desc":"client4","lastseen":1584682200}

Authentication

Some API requests will make global changes to the running daemon and may affect the availability of the n2n networking. Therefore the machine readable API include an authentication component.

Currently, the only authentication is a simple password that the client must provide. It defaults to 'n2n' and can manually be set through the command line parameter --management-password <pw> – for edge as well as for supernode.