You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

2.3 KiB

Traffic Restrictions

It is possible to drop or accept specific packet transmit over edge network interface by rules. Rules can be specify by (-R rule_str) multiple times.

Rule String Format

rule_str format: src_ip/len:[b_port,e_port],dst_ip/len:[s_port,e_port],TCP+/-,UDP+/-,ICMP+/-

ip/len indicate a cidr block, len can be ignore, means single ip (not cidr block) will be use in filter rule.

+,- after TCP,UDP,ICMP proto type indicate allow or drop packet of that proto. if any of above three proto missed, the rule will not take effect for that proto.

Ports range [s_port,e_port] can be instead by single port number. If not specify, [0,65535] will be used. Ports range include start_port and end_port.

examples: 192.168.1.5/32:[0,65535],192.168.0.0/24:[8081,65535],TCP-,UDP-,ICMP+ 192.168.1.5:[0,65535],192.168.0.0/24:8000,ICMP+ 192.168.1.5,192.168.0.7,TCP-,UDP-,ICMP- // packets by all proto of all ports from 192.158.1.5 to any ports of 192.168.0.7 will be dropped.

Multiple Rules

-R rule_str can be used multiple times to add multiple rules. Each -R rule_str add one rule. for example:

edge -c xxxx -k xxxx -a 192.168.100.5 -l xxx.xxx.xxx.xxx:1234 -r -R 192.168.1.5/32:[0,65535],192.168.0.0/24:[8081,65535],TCP-,UDP-,ICMP+ -R 192.168.1.5:[0,65535],192.168.0.0/24:8000,ICMP+ -R 192.168.1.5,192.168.0.7,TCP-

Matching Rules Priority

If multiple rules matching packet's ips and ports, the rule with smaller cidr block(smaller address space) will be selected. That means rules with larger len value has higher priority.

Actually, current implementation will add the len of src cidr and dst cidr of each matched rules as priority value, the rule with largest priority value will take effect.

Blocklist/Allowlist mode

Packets that cannot match any rule will be accepted by default. Users can add rules to block traffics.

This behavior can be change by add the rule : 0.0.0.0/0:[0,65535],0.0.0.0/0:[0,65535],TCP-,UDP-,ICMP-. Then all traffic will be dropped, users need add rules to allow traffics.

for example, -R 0.0.0.0/0,0.0.0.0/0,TCP-,UDP-,ICMP- -R 192.168.100.0/24,192.168.100.0/24,ICMP+ dropped all traffic, except ICMP traffics inside 192.168.100.0/24.

More complex behavior can be set with the feature of Matching Rules Priority.