* moved dev to version 3.1.1
* introduced n2n-portfwd tool
* moved port-forwarding source to tool
* adjusted tiny things, seemingly works with ./configure's --enable-miniupnp and --enable-natpmp
* adjusted for Windows
* wished for better typing skills
* applied some finishing touch
* typo
* moved dev to version 3.1.1
* laid ground for n2n-route tool
* adapted code style
* overhauled n2n-route's tool program logic and removed route code from edge
* added missing initialization of federation's purgeable field
* lifted un/purgeable confusion
* added warning about removed -n cli option
* realized that Windows does not offer inet_aton()
* removed -n option documentation from edge's man page
* slightly simplified n2n-route program logic
* applied more logic changes to n2n-route tool
* added 'info' read command to edge's management port
* corrected indention
* added Linux route control to n2n-route tool
* temporarily restricted n2n-route tool to Linux only
* We must be over the routing!
* pulled default gateway change detection into main loop to cover mobile use, and added devstr_t type
* corrected use of new UNPURGEABLE - so far gone unnoticed
* addresses possiible address issue
* i broke it
* reverted bad ideas
* added command line options, help text, and prevented vpn gateway being used for supernode/peer traffic routes
* added option to manually provide default gateway, also verbosity options
* getting there
* added option to limit networks to be routed (-n), adapted documentation
* fine-tuned minor things
* Refactor traceEvent to allow variable log levels
* Refactor sendto failed for less repetition
* Refactor sendto_fd to make control flow clearer, also reduce repetition
* Tie size to the actual object not its class
* Show destination that had issues when sendto_fd fails
* Fix MSVC compile - it doesnt support the same variadic macros as gcc
* UPnP port redirection is supported.
* compile fixes
* compile fix
* optimize reconnection code
* prepared upnp threadification to counter main loop stall at supernode change
* NAT-PMP port forwarding support, temporarily merge codes to resolve conflicts.
* make compile fix
* prepared threadification in more detail
* adopted threadification to new file setup
* cleaned up
* renamed functions and data structures
* fixes
* differentiated between miniupnp and natpmp and added corresponding lib support to makefile
* name
* commented unused header includes
* comments
* license
* fixes
* fixes
* fixes
* NAT-PMP is already available.
* added CLI parameter to disable port forwarding if required
* preliminary made use of multithreading
* adjusted log level
* added man page documentation
* def'ed conf
* made pmpnat adjustments
Co-authored-by: fengdaolong <fengdaolong@gmail.com>
* Ensure that recent code additions pass the linter
* Include some of the more obviously correct lint fixes to edge_utils.c
* Refactor edge JSON api into its own source file
* Use shorter names for static management functions
* Implement a JSON RPC way of managing the verbosity
* Tidy up help display in n2nctl script
* Make note of issue with implementing the stop command
* Implement a JSON RPC call to fetch current community
* Make n2nhttpd time value be more self-contained
* Make n2nhttpd order more closely match the existing management stats output
* Wire up status page to the verbosity setting
* Add JSON versions of the remainder of the edge management stats
* Add new file to cmake
* Properly define management handler
* Only update the last updated timestamp after a successful data fetch
* Function and types definition cleanup
* Force correct type for python scripts mgmt port
* Implement initial JSON API for supernode
* Fix whitespace error
* Use helper function for rendering peers ip4 address
* Proxy the auth requirement back out to the http client, allowing normal http auth to be used
* Ensure that we do not leak the federation community
* Use the same rpc method name and output for both edge and supernode for peers/edges
* Allow n2nctl to show raw data returned without resorting to tricks
* Make n2nctl pretty printer understandable with an empty table
* Use the full name for supernodes RPC call
* Use same RPC method name (but some missing fields) for getting communities from both edge and supernode
* Add *_sup_broadcast stats to edge packet stats output
* Refacter the stats into a packetstats method for supernode RPC
* Even if I am not going to prettyprint the timestamps, at least make all the timestamps on the page the same unit
* Simplify the RPC handlers by flagging some as writable and checking that in the multiplexer
* Remove invalid edges data
* Avoid crash on bad data to verbose RPC
* Avoid showing bad or inconsistant protocol data in communities RPC
* Minor clarification on when --write is handled
* Make linter happy
* Fix changed method name in n2nhttpd
* Move mainloop stop flag into the n2n_edge_t structure, allowing access from management commands
* Implement edge RPC stop command
* Move mainloop stop flag into the n2n_sn_t structure, allowing access from management commands
* Implement supernode RPC stop command
* Allow multiple pages to be served from mini httpd
* Extract common script functions into a separate URL
* Handle an edge case in the python rpc class
With a proper tag-based demultiplexer, this case should be a nop,
but we are single-threaded and rely on the packet ordering in this
library.
* Add n2nhttpd support to query supernode using urls prefixed with /supernode/
* Handle missing values in javascript table print
* Add another less filtering javascript key/value renderer
* Add a supernode.html page to the n2nhttpd
* Address lint issue
* Mention the second html page on the Scripts doc
* Remove purgable column from supernode edges list - it looks like it is rarely going to be set
* Add a simple one-line example command at the top of the API documentation
* Acknowledge that this is not the most efficient protocol, but point out that it was not supposed to be
* Make it clear that the n2nctl script works for both edge and supernode
* Fight with inconsistant github runner results
* Turn off the /right/ coverage generator
* Provide a minimal reimplementation of our autoconf, to try windows builds
* Try building with windows
* Fix thinko in spelling
* Ensure shell script runs inside a shell
* Add a hack to aid include discovery
* Just keep adding tech debt...
* Assume that we will have slashes in some of the replacement strings and avoid that char with sed
* Restore one slash
* Hack around the tools makefile interdependancy bug
* A correct cflags include hack for each compile dir
* Ensure we link against winsock (note, even though this says 32bit, it should link the 64bit library ... I think)
* Bad link ordering if we dont use LDLIBS
* Remove unused make variable
* Remove makefile duplication using inheritance (this does mean you can no longer cd tools; make, but must do make tools)
* Add missing library for win32
* Show OS variable
* Make hack autoconf more robust for tests on non gitlab runners
* Remove no longer used substitutions from hack autoconf
* Add missing include path to tools under win32
* Build the win32 subdir when the compiler is Msys
* The different subdirs have different dependancies
* Ensure we can find the include files
* Fix library link ordering
* Ensure the tools dir can find the special win32 lib
* Deal with the differing basic type sizes on both linux/64bit and windows/64bit
* Document the steps to mimic the github windows/mingw build locally - to allow for simpler debugging
* Ensure branch name in instructions matches my test branch name
* Clarify the shell needed to build with mingw
* Since the makefile depends on knowing the OS, raise a fatal error if we cannot determine this
* Handling different compile environments is hard.
- Linux: sane and reasonable results for both uname -s (=Linux) and
uname -o (=GNU/Linux)
- Windows/Mingw: insane results for uname -s
(=MSYS_NT-$MAJOR.$MINOR-$BUILDNR) but sane results for uname -o (Msys)
- Macos: sane results for uname -s (=Darwin) but does not support
uname -o at all
* Revamp the way that Mingw is detected
* Avoid attempting to generate gcovr report when running under windows
* Whoops, isolate the right step
* Fix spelling mistake
* win32/Makefile: Remove unused setting and add comment
* ensure that all win32 includes use the same expected path
* Allow simpler cross compilation by letting configure pass the CC and AR environment through
* Avoid multiple '_CRT_SECURE_NO_WARNINGS redefined' warnings
* Convert to a consolidated CONFIG_TARGET variable to select any different compile options
* Use the more generic printf defines to avoid warnings on mingw
* Update mingw build docs
* English better for reader happy make
* Address a number of mingw compiler warnings
* Fix Visual C compile
* Be sure to document some of the hacky nature of the mingw build
* Revert "Fix compilation on MacOS"
in order to another solution
* src: use IPPROTO_TCP in place of SOL_TCP
* use the more specific IPPROTO_TCP type for setsockopt
* fixes build on MacOS
src/edge_utils.c:891:31: error: use of undeclared identifier 'SOL_TCP'; did you mean 'FPP_TCP'?
setsockopt(eee->sock, SOL_TCP, TCP_NODELAY, &value, sizeof(value));
src/edge_utils.c:894:31: error: use of undeclared identifier 'SOL_TCP'
setsockopt(eee->sock, SOL_TCP, TCP_CORK, &value, sizeof(value));
^
src/edge_utils.c:894:40: error: use of undeclared identifier 'TCP_CORK'
setsockopt(eee->sock, SOL_TCP, TCP_CORK, &value, sizeof(value));
* include/n2n.h: drop redefiniton of SOL_TCP for WIN32, as we don't use it anywhere now
* src: only use TCP_CORK on LINUX
* it's LINUX only and fails on Win32 and MacOS (man 7 tcp)
* Add new file 'network_traffic_filter.c/.h"
* Add feature to drop or accept specific packet transmit over edge network interface by rules.
* fix CMakeLists.txt typo
* Update Rule String Format
* replace -F (filter) with -R (rule) for traffic restrictions.
* Update edge help (-h) message. Update documents.
* Pass Build on CircleCI and local Windows 10 VS2019
* Fix cmake build failed because of sn_selection
* fix operate void* cause vs2016 build failed
* Fix typo to pass build on windows.
* add inttypes.h for n2n_typedefs.h to pass windows build
* modify headers to pass build on windows.
* Add new file 'network_traffic_filter.c/.h"
* Add feature to drop or accept specific packet transmit over edge network interface by rules.
* fix CMakeLists.txt typo
* Update Rule String Format
* replace -F (filter) with -R (rule) for traffic restrictions.
* Update edge help (-h) message. Update documents.
* add cmake export commands
* add extra edge description (hint) field
* add peer2peer description registry
* fixed bug: peer2peer not pass the dev_desc filed
* update -I option in the helper text
Co-authored-by: Longtao Wang <longtao.wang@cortexlabs.ai>
Logan oos Even
Hamish Coleman
Sven Roederer
Alfredo Cardigliano
vtcpip
Francesco Carli
joshuafc
lucaderi
BetaBeauty
fcarli3
Logan007
VergLsm