* moved dev to version 3.1.1
* introduced n2n-portfwd tool
* moved port-forwarding source to tool
* adjusted tiny things, seemingly works with ./configure's --enable-miniupnp and --enable-natpmp
* adjusted for Windows
* wished for better typing skills
* applied some finishing touch
* typo
* moved dev to version 3.1.1
* laid ground for n2n-route tool
* adapted code style
* overhauled n2n-route's tool program logic and removed route code from edge
* added missing initialization of federation's purgeable field
* lifted un/purgeable confusion
* added warning about removed -n cli option
* realized that Windows does not offer inet_aton()
* removed -n option documentation from edge's man page
* slightly simplified n2n-route program logic
* applied more logic changes to n2n-route tool
* added 'info' read command to edge's management port
* corrected indention
* added Linux route control to n2n-route tool
* temporarily restricted n2n-route tool to Linux only
* We must be over the routing!
* pulled default gateway change detection into main loop to cover mobile use, and added devstr_t type
* corrected use of new UNPURGEABLE - so far gone unnoticed
* addresses possiible address issue
* i broke it
* reverted bad ideas
* added command line options, help text, and prevented vpn gateway being used for supernode/peer traffic routes
* added option to manually provide default gateway, also verbosity options
* getting there
* added option to limit networks to be routed (-n), adapted documentation
* fine-tuned minor things
* Fix cmake informational log messages
* If the correct library name is used find_library works better
* Re-enable remaining find_library users
* Reorder cmake to make libpcap detection work
For a moment there, I was starting to think that I might have found
a good feature in cmake, but then it turned out that it had specific
ordering requirements and strange cryptic functions that error out
in mysterious ways.
If I am going to have an antique build engine with special quirks that
I must learn in order to use it, I may as well choose the one that is
not also trying to be clever and hiding its internal magic from me.
Which means that I still prefer Makefiles - they are more debuggable.
* Ensure all options start off for cmake too
* Attempt to make the build time config logic in the cmake process match the makefile process
* Add a simple muscle memory helper for cmake
* Ask them what they are smoking, then tell them to put it out
* Avoid occasional stale package cache errors
* UPnP port redirection is supported.
* compile fixes
* compile fix
* optimize reconnection code
* prepared upnp threadification to counter main loop stall at supernode change
* NAT-PMP port forwarding support, temporarily merge codes to resolve conflicts.
* make compile fix
* prepared threadification in more detail
* adopted threadification to new file setup
* cleaned up
* renamed functions and data structures
* fixes
* differentiated between miniupnp and natpmp and added corresponding lib support to makefile
* name
* commented unused header includes
* comments
* license
* fixes
* fixes
* fixes
* NAT-PMP is already available.
* added CLI parameter to disable port forwarding if required
* preliminary made use of multithreading
* adjusted log level
* added man page documentation
* def'ed conf
* made pmpnat adjustments
Co-authored-by: fengdaolong <fengdaolong@gmail.com>
* Make it clear which hash we are testing
* Coverage for all pearson hash variants
* Initial coverage for auth.c
* Add some more auth.c coverage
* Ensure new bins are added to both build systems
* Ensure new source files are fully linted
* Factor build packages out into a more maintainable list
* Create a location for scripts to live
* Provide a make target to return the source dir as close as reasonable to the original distributed state
* Add a code lint step, checking the coding style
* Change test harness as recommended by shellcheck
* Ensure we actually have the linter tool installed
* Use the correct directory for cmake to run the tests
* Adjust for the older uncrustify in the current github ubuntu-latest
* Make one file pass the linter
* Integrate the lint with the existing test workflow
* Add files with minimal changes needed to the linter
* Add more files with minimal changes needed to the linter
* Dont build binaries if we fail the lint test
* Update the phony targets with the lint steps
* Ensure the flake8 package is installed in the new lint workflow job
* Use the makefile to drive the packages needed to install for linting
* No need to add dependancies on lint, just rely on the workflow status to show failure
* Update the scripts dir README to reflect current assumptions
* Rename and briefly document the indent.sh script
* Fix the ignore to ignore the right Makefile
* Rename the test_harness script to make it clear it is a shell script
* Provide a master lint make target and add a shell script lint tool
* Elminate stray tabs
* Drop include/auth.h from linter - there are inconsistant results with function definitions when using the current uncrustify rules
* Ensure that recent code additions pass the linter
* Include some of the more obviously correct lint fixes to edge_utils.c
* Refactor edge JSON api into its own source file
* Use shorter names for static management functions
* Implement a JSON RPC way of managing the verbosity
* Tidy up help display in n2nctl script
* Make note of issue with implementing the stop command
* Implement a JSON RPC call to fetch current community
* Make n2nhttpd time value be more self-contained
* Make n2nhttpd order more closely match the existing management stats output
* Wire up status page to the verbosity setting
* Add JSON versions of the remainder of the edge management stats
* Add new file to cmake
* Properly define management handler
* Only update the last updated timestamp after a successful data fetch
* Function and types definition cleanup
* Force correct type for python scripts mgmt port
* Implement initial JSON API for supernode
* Fix whitespace error
* Use helper function for rendering peers ip4 address
* Proxy the auth requirement back out to the http client, allowing normal http auth to be used
* Ensure that we do not leak the federation community
* Use the same rpc method name and output for both edge and supernode for peers/edges
* Allow n2nctl to show raw data returned without resorting to tricks
* Make n2nctl pretty printer understandable with an empty table
* Use the full name for supernodes RPC call
* Use same RPC method name (but some missing fields) for getting communities from both edge and supernode
* Add *_sup_broadcast stats to edge packet stats output
* Refacter the stats into a packetstats method for supernode RPC
* Even if I am not going to prettyprint the timestamps, at least make all the timestamps on the page the same unit
* Simplify the RPC handlers by flagging some as writable and checking that in the multiplexer
* Remove invalid edges data
* Avoid crash on bad data to verbose RPC
* Avoid showing bad or inconsistant protocol data in communities RPC
* Minor clarification on when --write is handled
* Make linter happy
* Fix changed method name in n2nhttpd
* Move mainloop stop flag into the n2n_edge_t structure, allowing access from management commands
* Implement edge RPC stop command
* Move mainloop stop flag into the n2n_sn_t structure, allowing access from management commands
* Implement supernode RPC stop command
* Allow multiple pages to be served from mini httpd
* Extract common script functions into a separate URL
* Handle an edge case in the python rpc class
With a proper tag-based demultiplexer, this case should be a nop,
but we are single-threaded and rely on the packet ordering in this
library.
* Add n2nhttpd support to query supernode using urls prefixed with /supernode/
* Handle missing values in javascript table print
* Add another less filtering javascript key/value renderer
* Add a supernode.html page to the n2nhttpd
* Address lint issue
* Mention the second html page on the Scripts doc
* Remove purgable column from supernode edges list - it looks like it is rarely going to be set
* Add a simple one-line example command at the top of the API documentation
* Acknowledge that this is not the most efficient protocol, but point out that it was not supposed to be
* Make it clear that the n2nctl script works for both edge and supernode
* Fight with inconsistant github runner results
* Turn off the /right/ coverage generator
* Add a simple test framework
* Add a code coverage report example oneliner
* Move the coverage report into a separate directory
* Add a github action to run tests and publish a branch with the coverage report
* Fix: Missing job separator
* Fix: remember to actually run configure
* Fix: Gotta autogen before I configure
* Dont try to upload coverage report unless this is a push
* Clearly show the git ref tested in the coverage report
* Add a test for the various transforms
* Add tests for the elliptic curve and pearson hash
* Ensure we ignore new generated output
* Remove unneeded boilerplate from the compression tests
* Add an example of a test of the encoded wire packets
* Ensure that correctly testable data is output even when zstd is not compiled
* Factor test runner out into its own script and attempt to add it to the cmake file
* Tell cmake about a new object file
* Stop trying to make Cmake work...
* Stop trying to make cmake work, round 2
* In the middle of a thousand lines of cmake output was one important one - windows could not find assert() - try again
* Try again to plumb the tests into cmake
* Add missing library to our superset install line
* Fix build error when libcap-dev is installed
* Switch to using artifact uploads instead of pages to store/show the coverage report
* Fix artifact upload yaml
* Upload coverage report to codecov
* Fix codecov - clearly it doesnt do a recursive search for coverage files
* Fix codecov - my hopeful use of a list of directories didnt work
* Fix codecov - unfortunately, it doesnt just consume the coverage data and needs us to generate the gcov output
* Fix codecov - nope, it still doesnt recursively search
* Fix codecov - it really helps if I run the gcov data generator
* Add a simple matrix build
* Fix older ubuntu versions of gcovr that do not support the '--html-title' option
* Ensure we use gcover options that are identical on older ubuntu
* Improve coverage generation and required build packages
* Move the makefiles towards a clearer arrangement
* Break circular make dependancy and start using implicit rules for most compilation
* Fix old cmake to compile again after renames
* Add new file 'network_traffic_filter.c/.h"
* Add feature to drop or accept specific packet transmit over edge network interface by rules.
* fix CMakeLists.txt typo
* Update Rule String Format
* replace -F (filter) with -R (rule) for traffic restrictions.
* Update edge help (-h) message. Update documents.
* Pass Build on CircleCI and local Windows 10 VS2019
* Fix cmake build failed because of sn_selection
* fix operate void* cause vs2016 build failed
* Fix typo to pass build on windows.
* add inttypes.h for n2n_typedefs.h to pass windows build
* modify headers to pass build on windows.
* Add new file 'network_traffic_filter.c/.h"
* Add feature to drop or accept specific packet transmit over edge network interface by rules.
* fix CMakeLists.txt typo
* Update Rule String Format
* replace -F (filter) with -R (rule) for traffic restrictions.
* Update edge help (-h) message. Update documents.
* add cmake export commands
* add extra edge description (hint) field
* add peer2peer description registry
* fixed bug: peer2peer not pass the dev_desc filed
* update -I option in the helper text
Co-authored-by: Longtao Wang <longtao.wang@cortexlabs.ai>
Logan oos Even
Hamish Coleman
skyformat99
Luca Deri
fengdaolong
joshuafc
vtcpip
fei4xu
BetaBeauty
南浦月
Logan007