The new -n option can now be used to setup routes directly from the edge command line.
It supports both network routes and default gateway routes. Here is an example:
- "-n 192.168.100.0/24:192.168.99.1" routes the 192.168.100.0/24 network traffic via 192.168.99.1
- "-n 0.0.0.0/0:192.168.99.1" routes all the host traffic via 192.168.99.1
1. Some nat router blocks the port if incoming traffic arrives before outcoming traffic being sent. Give edge ability to set proper TTL so that the registration packet is dropped before it arrives peer.
2. Support Symmetric NAT by predicting 15 more ports when sending registration packet
3. Purge pending mac also on P2P normal packet. This is actually more usual condition.
4. Add doc for new flag.
- The edge structure is now opaque
- The configuration is now exposed via an API
- Code cleanup: using multiple transops at once is not supported anymore
edge detects it and bypsses the supernode
deri@Lucas-iMac.local 132> ping 192.168.254.126
PING 192.168.254.126 (192.168.254.126): 56 data bytes
64 bytes from 192.168.254.126: icmp_seq=0 ttl=64 time=84.314 ms <<== via supernode
64 bytes from 192.168.254.126: icmp_seq=1 ttl=64 time=0.989 ms <<== local network announce detected
64 bytes from 192.168.254.126: icmp_seq=2 ttl=64 time=0.642 ms
64 bytes from 192.168.254.126: icmp_seq=3 ttl=64 time=0.727 ms
^C
--- 192.168.254.126 ping statistics ---
4 packets transmitted, 4 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.642/21.668/84.314/36.169 ms