let auto ip feature handle several sub-networks

community.list

@@ -38,28 +38,28 @@ ntop[0-1][0-9]
 #      fixed-name communities can optionally be followed by a network using the 
 #      network/bitlen syntax such as the following line
 #
-home 192.168.1.0/24
+home 192.168.168.0/24
 #
 #      the supernode draws ip addresses to assign to the edges (if they omit the `-a`
 #      parameter) from this network. note that the network is delimited by [SPACE] so
-#      community names cannot contain a [SPACE] either.
+#      community names cannot contain [SPACE] either.
 #   
 #      if no network is provided here, the supernode assigns some other network to each
 #      community. networks are taken from the default range 10.128.0.0 - 10.255.255.0/24
-#      as long as no other network rane is provided through the supernode's command line
+#      as long as no other network range is provided through the supernode's command line
 #      option `-d`. those sub-networks are distinct so several edges with different
 #      communities can be used at the same computer (being served ip addresses from the
-#      same supernode). also, the networks described in this file are avoided.
+#      same supernode). also, the sub-networks described in this file are avoided.
 #
-#      however, all networks assigned in this file are not checked for colliding ranges
+#      however, all networks assigned in this file are not mutually checked for colliding 
-#      so different communities can use same or overlapping sub-networks. that does not
+#      ranges so different communities can use same or overlapping sub-networks. that does
-#      impose a problem if the communities do not share edge nodes.
+#      not impose a problem if the communities do not share edge nodes.
 #
 #      there seems to be no sense in pre-assigning sub-networks to communities whose
-#      names are defined by regular expressions. those will be assigned a sub-network
+#      names are defined by regular expressions. those will be assigned distinct
-#      from the default range or the `-d` range.
+#      sub-networks from the default range or the `-d` range.
 #
 #      if `-a` is used with the edge, the edge uses the ip address specified with the
 #      `-a xxx.xxx.xxx.xxx` option. also, the enhanced syntax `-r -a dhcp:0.0.0.0` is
-#      still available to serve more professional needs by a dhcp server.
+#      still available to have more professional needs served by a full dhcp server.
 #