You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

39 lines
2.2 KiB

# n2n Frequently Asked Questions
4 years ago
## Supernode
4 years ago
### I want to setup a supernode that only I can use. Perhaps even password protected?
Please think of the community-name as password and start the supernode with the `-c <community file>` parameter where the `<community file>` is the path to a simple text file containing a single line with the name of your secret community. It will be the only community allowed. Only edge nodes from that community can join (`-c <community name>` at the edge).
If you additionally want to prevent open transmission of your secret community name via the network, **all** edge nodes should use `-H` command line option for header encryption.
Also, please see the community.list file for advanced use of that file.
Beyond this access barrier you may want to use payload encryption `-A_` at the edges. Only the edges – not the supernode – are able to decipher the payload data. So, even if anyone would be able to break the access barrier to the supernode, the payload remains protected by the payload crypto, see [this document](https://github.com/ntop/n2n/blob/dev/doc/Crypto.md) for details.
4 years ago
### Can I get a list of connected edge node and their community and source IP from the supernode?
4 years ago
The supernode provides basic information via its localhost udp management port. It defaults to 5645 and can be changed using supernode's `-t` command line option.
4 years ago
You can request the current status by just sending a new line, i.e. pressing [ENTER] key, running the following command (localhost only)
`netcat -u localhost 5645`
4 years ago
## Edge
### How can I know if peer-to-peer connection has successfully been established?
4 years ago
The edge also offers a local udp management port at which it provides some information about connected _peers_ allowing a peer-to-peer connection, and _pending peers_ whose connections are forwarded through the supernode.
4 years ago
The edge's management port defaults to 5644 and can be changed using edge's `-t` command line option. Connecting using the following command (localhost only)
`netcat -u localhost 5644`
4 years ago
answers every new line, i.e. pressing [ENTER] key, with current information. The edge even understands some simple commands, try `help`.