mirror of https://github.com/ntop/n2n.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
24 lines
973 B
24 lines
973 B
5 years ago
|
n2n supports the carriage of IPv6 packets within the n2n tunnel. N2n does not
|
||
|
|
yet use IPv6 for transport between edges and supernodes.
|
||
|
|
|
||
|
|
To make IPv6 carriage work you need to manually add IPv6 addresses to the TAP
|
||
|
|
interfaces at each end. There is currently no way to specify an IPv6 address on
|
||
|
|
the edge command line.
|
||
|
|
|
||
|
|
eg. under linux:
|
||
|
|
|
||
|
|
on hostA:
|
||
|
|
`[hostA] $ /sbin/ip -6 addr add fc00:abcd:1234::7/48 dev n2n0`
|
||
|
|
|
||
|
|
on hostB:
|
||
|
|
`[hostB] $ /sbin/ip -6 addr add fc00:abcd:1234::6/48 dev n2n0`
|
||
|
|
|
||
|
|
You may find it useful to make use of tunctl from the uml-utilities
|
||
|
|
package. Tunctl allow you to bring up a TAP interface and configure addressing
|
||
|
|
prior to starting edge. It also allows edge to be restarted without the
|
||
|
|
interface closing (which would normally affect routing tables).
|
||
|
|
|
||
|
|
Once the IPv6 addresses are configured and edge started, IPv6 neighbor discovery
|
||
|
|
packets flow (get broadcast) and IPv6 entities self arrange. Test your IPv6
|
||
|
|
setup with ping6 - the IPv6 ping command.
|